Cali Terpenes - Critical, 1ml

Application instructions and safety information for pure terpenes

Safety instructions

• 100% purity: These terpenes are 100% pure and must be handled with care.
• Never consume undiluted: Terpenes must never be consumed or vaporised directly. They must always be diluted in an extract, oil, resin or liquid base.
• Avoid contact: Avoid contact with skin and eyes.
• Exception (undiluted): When used exclusively for flavouring flowers and extracts, the product may also be applied undiluted. Inhalation, oral ingestion or other direct intake of the pure aroma is strictly prohibited.
• Safety after dilution: Once diluted in the desired product and in the correct ratio, terpenes are 100% safe.

Dosage and dilution

As a guide for dosage, 1 ml of terpenes = 40 drops (0.025 ml per 1 ml drop). Therefore, 1 drop of terpenes corresponds to approximately 0.25% of a 10 ml liquid base.

• Dilution examples (in 10 ml liquid base):
  • 1 drop: approx. 0.25%
  • 2 drops: 0.50%
  • 4 drops: 1%
  • 8 drops: 2%
  • 12 drops: 3%
• Recommendation: We recommend testing the quantities starting with the lowest amount, as our terpenes have a slightly intense aroma and taste.

Application and recommended quantities

1. Liquid vaping bases (for the production of e-liquids)

• Recommended proportion: Between 1% and 3% terpenes. The most common amount is 2%.
• Maximum amount: Up to 4%.
• Example dosage:
  • For 10 ml of e-liquid base with 2% terpenes, you need 0.2 ml of terpenes.
  • For 100 ml of e-liquid base with 2% terpenes, you need 2 ml of terpenes.

2. Cannabis extracts and concentrates

• Recommended proportion: Between 1% and 3% terpenes. The norm is 2% to 3%.
• Example dosage: To add 3% terpenes to 10 g of cannabis concentrate, you need 0.3 ml of terpenes.
• Mixing process:
  • We strongly recommend testing the amount used and starting small (e.g. 1 drop for 3 g).
  • It is important to mix the creation properly and let it steep for at least 24 to 48 hours so that the terpenes are fully absorbed.

3. Hemp or cannabis flowers

• Maximum proportion: No more than 4% terpenes. Often less is needed, as flowers already contain their own terpenes.
• Use: To enhance and improve the aroma.
• Methods:
  • The ideal method is to use Terps Spray.
  • For smaller quantities (1 g to 10 g), a sheet of drying paper can be sprayed with a few drops of terpenes and placed in an airtight container next to the dried flowers.
• Storage: Store the flowers in airtight and/or vacuum-sealed containers to ensure complete absorption.

4. Edibles and beverages

• Proportion: The correct proportion is much lower than that used in e-liquids or cannabis products.
• Method: We recommend using terpenes in cold processes to prevent evaporation.
• Examples of recommended proportions:
  • Ice cream: 0.025 to 0.1 ml for approx. 1 kg.
  • Beer: 0.01 to 0.05 ml of terpenes per approx. 1 litre of beer.
  • Oils: 0.1 to 0.3 ml of terpenes per approx. 1 litre of oil.
  • Honey: 0.1 to 0.5 ml of terpenes for 1 to 2 kg of honey.
  • Chocolate: 0.25 to 1 ml per approx. 1 kg.

Safety Warning Signal word DANGER
	H410 Very toxic to aquatic life with long lasting effects. H304 May be fatal if swallowed and enters the respiratory tract. H319 Causes serious eye irritation. H226 Flammable liquid and vapor. H315 Causes skin irritation. H317 May cause allergic skin reactions. >> Download Safety Data Sheet!